Descrição
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
< 10 %
Power factor λ
0.98
Efficiency in full-load
91 %
Device power loss
8.6 W
Protective conductor current
<0.7 mA
Inrush current
< 40 A
Max. ECG no. on circuit breaker 10 A (B)
10
Max. ECG no. on circuit breaker 10 A (C)
16
Max. ECG no. on circuit breaker 16 A (B)
16
Max. ECG no. on circuit breaker 16 A (C)
26
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
27…57 / 27…42 V
U-OUT (working voltage)
70 V
Nominal output current
1200 / 1350 / 1500 / 1650 mA
Output current tolerance
±7.5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
32.5…77 W
Maximum output power
77 W
Galvanic isolation
SELV
Current set
DipSwitch
Default output current
1650 mA
Dimensions & weight
Mounting hole spacing, length
94.0 mm
Mounting hole spacing, width
58.0 mm
Product weight
170.00 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 / 0.75…1.5 mm²
Wire preparation length, input side
7…8 mm
Wire preparation length, output side
7…8 mm
Height
29.5 mm
Width
67.0 mm
Length
103.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+50/-20…+45 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-20…80 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 30000 h
Additional product data
Predecessor EAN
4052899917583
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Number of channels
1
Suitable for through-wiring
Yes with optional cable clamp
Programming
Programming device
DIPswitch
Certificates & standards
Approval marks – approval
CCC / CE / RCM / ENEC 05
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547/Acc. to CISPR 15
Type of protection
IP20
Protection class
II
Avaliações
Não há avaliações ainda.